RC drift setup guide

2. Visual RC Drift Component Glossary (Beginner & Advanced)

Reference guide for all chassis components mentioned in tuning literature. Click any linked component name anywhere in the guide to jump directly to its entry.

Turnbuckle (Linkage Rod)

Definition: Threaded metal rod with opposing left-hand and right-hand threads. Rotating the center hex changes link length to adjust camber or toe without removing ball cups.

Shims & Spacers

Definition: Precision metal or plastic washers (typically 0.1mm to 3.0mm thick). Installed under ball studs or on hinge pins to fine-tune roll center height, Ackermann angles, caster angle, and eliminate suspension slop.

Ball Stud & Ball Cup

Definition: Spherical pivot joint assembly. The threaded metal ball stud screws into towers or knuckles, while the plastic ball cup snaps over it to allow multi-angle movement of turnbuckle links.

Hinge Pin

Definition: Precision polished steel shaft passing through lower or upper suspension arms. Secured by suspension mount blocks to establish smooth arm pivot movement.

Steering Knuckle (Upright)

Definition: Front hub assembly holding wheel axle bearings and pivoting on kingpins. Translates steering tie-rod movement into wheel angle.

Steering Slide Rack

Definition: Rail-guided linear steering mechanism. Provides smooth, linear parallel movement across left-to-right travel with minimal slop.

Caster Block (C-Hub)

Definition: Structural carrier holding front steering kingpins. Defines the static backward tilt angle (caster) of front steering pivots.

Shock Tower (Damper Stay)

Definition: Carbon fiber or aluminum plate mounted to bulkheads. Features multiple mounting holes to alter oil damper angles.

Oil Damper (Coilover Shock)

Definition: Oil-filled cylinder with internal piston and outer spring. Controls chassis body roll speed, rebound, and dynamic weight transfer.

Suspension Mount Block

Definition: Machined blocks securing lower arm hinge pins. Dictates rear toe-in, track width, and anti-squat geometry.

Differential (Gear / Ball / Spool)

Definition: Rear axle drive unit. Gear diffs use internal bevel gears and oil; ball diffs use adjustable friction tension; spools lock both rear axles solid for maximum drive.

Wheel Hex Hub Adapter

Definition: Hexagonal hub clamping onto the axle shaft with a drive pin. Interlocks with the wheel center. Thickness (4mm to 9mm) directly alters track width.

Gyroscope Unit (Drift Gyro)

Definition: Electronic heading sensor detecting chassis counter-rotation. Automatically inputs counter-steering signals to the servo to prevent uncontrolled spins.

More setup guides